Updates

News at 1225 – Continuous Improvement

2013 is off to great start with the implementation of a number of continuous process improvements affecting quality, capacity, and cycle times at our coating division facility on 1225 Greenleaf Avenue in Elk Grove Village, Illinois. Installation of vent-less powder coating booth specifically designed for Bell Helicopter bluecoat and prime aerospace applications. MIL Inc. applies a broad spectrum of epoxy, polyurethane, polyester, nylon and various proprietary powder coating materials meeting most industry and aerospace specifications. In addition to our enhanced

Read More »

News at 1401 – Chem Mill, Boeing, Metal Finishing

Good things are happening at MIL Inc’s primary facility at 1401 Greenleaf… Boeing recently approved MIL Inc. for chemical milling of titanium sheet in accordance with PS20022. There are only a handful of Boeing approved suppliers worldwide capable of this unique process. Check out our comprehensive growing list of Boeing approvals at the following link: http://active.boeing.com/doingbiz/d14426/getprocesscodes.cfm?SupplierCode=BE10014316 Thank you for your patience in December and January as we made significant enhancements and performed preventive maintenance on our passivation, electropolish, and hard

Read More »

MIL to Exhibit at 2012 EAA AirVenture Show in Oshkosh

For the first time, Magnetic Inspection Laboratory, Inc., will be exhibiting at the immensely popular and entertaining EAA AirVenture show in Oshkosh, WI. “The World’s Greatest Aviation Celebration” will take place July 23-29, 2012. The event draws more than 500,000 aviation enthusiasts and 10,000 aircraft from over 60 countries on an annual basis. Since the 1950’s, spectators have marveled at the overwhelmingly expansive collection of all things aviation: Warbirds, vintage, homebuilts, ultralights, etc. fill the skies with aerobatics and pyrotechnics.

Read More »

News at 1225 – Continuous Improvement

2013 is off to great start with the implementation of a number of continuous process improvements affecting quality, capacity, and cycle times at our coating division facility on 1225 Greenleaf Avenue in Elk Grove Village, Illinois. Installation of vent-less powder coating booth specifically designed for Bell Helicopter bluecoat and prime aerospace applications. MIL Inc. applies a broad spectrum of epoxy, polyurethane, polyester, nylon and various proprietary powder coating materials meeting most industry and aerospace specifications. In addition to our enhanced powder coating capabilities, a February installation is planned for our new 3,900 cubic foot F.O.D. controlled down draft spray booth and 80,000 CFM air management system setting new standards for high purity coating applications. Concurrently, masking capacity and capabilities have been generously increased with the

Read More »

News at 1401 – Chem Mill, Boeing, Metal Finishing

Good things are happening at MIL Inc’s primary facility at 1401 Greenleaf… Boeing recently approved MIL Inc. for chemical milling of titanium sheet in accordance with PS20022. There are only a handful of Boeing approved suppliers worldwide capable of this unique process. Check out our comprehensive growing list of Boeing approvals at the following link: http://active.boeing.com/doingbiz/d14426/getprocesscodes.cfm?SupplierCode=BE10014316 Thank you for your patience in December and January as we made significant enhancements and performed preventive maintenance on our passivation, electropolish, and hard anodize process lines. These improvements will yield higher quality, reduced lead times and double our hard anodize capacity.

Read More »

MIL to Exhibit at 2012 EAA AirVenture Show in Oshkosh

For the first time, Magnetic Inspection Laboratory, Inc., will be exhibiting at the immensely popular and entertaining EAA AirVenture show in Oshkosh, WI. “The World’s Greatest Aviation Celebration” will take place July 23-29, 2012. The event draws more than 500,000 aviation enthusiasts and 10,000 aircraft from over 60 countries on an annual basis. Since the 1950’s, spectators have marveled at the overwhelmingly expansive collection of all things aviation: Warbirds, vintage, homebuilts, ultralights, etc. fill the skies with aerobatics and pyrotechnics. Meanwhile, a fly-in theater, opening day concert, forums, and workshops take place at ground level. Visitors can find MIL at booth #3160 in the Rockwell Collins Hangar C. Planning to see the show? Leave a reply in the comments area… Source: EAA AirVenture Website

Read More »

2022 Trade Show Dates

Location: Rockford, IL
Date: March 10th
Location: Dallas, TX
Dates: April 26th- 28th
Location: Schaumburg
Dates: May 11th-12th

Contact our support team for help with more specific questions about our offerings and processes.

On Trend

Most Popular Stories

MIL Featured in Design2Part Magazine

Human Driven Special Processes Are a Vital Link in the Aerospace Supply Chain Magnetic Inspection Laboratory (MIL), a company that provides special process services like

Search our approvals

Search
Generic filters