| PROCESS CODE | SPECIFICATION | DESCRIPTION | APPROVED | REMARKS |
|
| Applies to Raytheon – Sudbury, MA location (Per latest PRI document) Per Raytheon Quality Note JY and PRI Document pfrm10 this division of Raytheon accepts NADCAP approval for the following categories: CP, CT, HT, MTL, NDT, WLD** See notes for definitions | |||||
| ANODIZING | AMS 2468 | HARD COAT (S/S BY AMS 2469) | ✔ | ||
| AMS 2469 | TYPE III HARD COAT | ✔ | |||
| AMS 2470 | TYPE I | ✔ | |||
| AMS 2471 | TYPE II UNDYED | ✔ | |||
| AMS 2472 | TYPE II DYED | ✔ | |||
| MIL-A-8625 / AMS-A-8625 | TYPE I, II, & III | ✔ | |||
| BLACK OXIDE | AMS 2485 | ✔ | |||
| MIL-C-13924 / MIL-DTL-13924 | |||||
| CADMIUM PLATING | AMS 2400 | ✔ | |||
| QQ-P-416 / AMS-QQ-P-416 | ✔ | ||||
| CHEMICAL CLEANING | ASTM B 600 | CHEMICAL CLEANING | ✔ | ||
| CHEM FILM | AC7108 | CHEM PROCESSING CRITERIA | ✔ | ||
| AMS 2473 | ALUMINUM | ✔ | |||
| AMS 2474 | ALUMINUM | ✔ | |||
| MIL-C-5541 / MIL-DTL-5541 | ALUMINUM | ✔ | |||
| CHEM MILL | AC7108/5 | CHEM. MILL CRITERIA | ✔ | ||
| MIL-C-81769 / AMS-C-81769 | ✔ | ||||
| COATING/PAINT | AC7108/1 | COATING CRITERIA | ✔ | ||
| DOD-P-15328 | ✔ | ||||
| MIL-C-17711 | ✔ | ||||
| MIL-C-22750 / MIL-PRF-22750 | ✔ | ||||
| MIL-C-46168 | ✔ | ||||
| MIL-C-47118 | ✔ | ||||
| MIL-C-53039 | ✔ | ||||
| MIL-C-81751 | ✔ | ||||
| MIL-C-83285 | ✔ | ||||
| MIL-C-83286 | ✔ | ||||
| MIL-C-8514 | ✔ | ||||
| MIL-C-85285 / MIL-PRF-85285 | ✔ | ||||
| MIL-C-85614 | ✔ | ||||
| MIL-DTL-64159 | ✔ | ||||
| MIL-F-14072 | ✔ | ||||
| MIL-F-18264 | ✔ | ||||
| MIL-F-7179 | ✔ | ||||
| MIL-L-23398 | DFL | ✔ | |||
| MIL-L-45983 | DFL | ✔ | |||
| MIL-L-46010 / MIL-PRF-46010 | ALL TYPES | ✔ | |||
| MIL-L-46147 | DFL | ✔ | |||
| MIL-L-81329 | ✔ | ||||
| MIL-L-8937 | DFL | ✔ | |||
| MIL-P-23377 / MIL-PRF-23377 | ✔ | ||||
| MIL-P-53022 | ✔ | ||||
| MIL-P-53030 | ✔ | ||||
| MIL-P-7962 | ✔ | ||||
| MIL-P-85582 / MIL-PRF-85582 | ✔ | ||||
| TT-P-28 | ✔ | ||||
| PASSIVATION | QQ-P-35 / AMS-QQ-P-35 | TYPE II, VI, VII, &VIII; | ✔ | ||
| ASTM A 380 | ✔ | ||||
| ASTM A 967 | ✔ | ||||
| AMS 2700 | ✔ | ||||
| PHOSPHATE COATING | AMS 2480 | ✔ | |||
| AMS 2481 | ✔ | ||||
| DOD-P-16232 / MIL-DTL-16232 | Type M | ✔ | |||
| TT-C-490 | ✔ | ||||
| NDE | AC7114 | NDT CRITERIA | ✔ | ||
| AC7114/4 | NDT RADIOGRAPHIC CRITERIA | ✔ | |||
| AC7114/1 | NDT PENETRANT CRITERIA | ✔ | |||
| AC7114/2 | NDT MAG PARTICLE CRITERIA | ✔ | |||
| AC7108/2 | ETCH PROCESSING CRITERIA | ✔ | |||
| AMS 2649 | TEMPER ETCH | ✔ | |||
| MIL- STD-867 | TEMPER ETCH | ✔ | |||
| WELDING | AC7110/12 | WELDER/WELDING CRITERIA | ✔ | ||
| AC7110/12S | WELDER/WELDING CRITERIA | ✔ | |||
| AC7110/1 | BRAZING (TORCH/INDUCTIONS) | ✔ | |||
| AC7110 | WELDING/BRAZING CRITERIA | ✔ | |||
| AC7110/5 | FUSION WELD CRITERIA | ✔ | |||
| AC7110/5S | FUSION WELD CRITERIA | ✔ | |||
| CP- Chemical Processing CT- Coatings HT- Heat Treatment MTL- Materials Testing Laboratory NDT- Non Destructive Testing WLD- Welding | |||||
