Request a Quote

Updates

MIL Featured in Design2Part Magazine

Human Driven Special Processes Are a Vital Link in the Aerospace Supply Chain Magnetic Inspection Laboratory (MIL), a company that provides special process services like anodizing and cadmium plating to aerospace prime contractors, has been an approved supplier to Lockheed Martin for more than three decades. The company began in 1942 as a one-man operation that examined parts for the U.S. Government. Today, Magnetic Inspection Laboratory provides five broad categories of services, including chemical processing (CP), coatings (CTG), nondestructive testing

Read More »

News at 1225 – Continuous Improvement

2013 is off to great start with the implementation of a number of continuous process improvements affecting quality, capacity, and cycle times at our coating division facility on 1225 Greenleaf Avenue in Elk Grove Village, Illinois. Installation of vent-less powder coating booth specifically designed for Bell Helicopter bluecoat and prime aerospace applications. MIL Inc. applies a broad spectrum of epoxy, polyurethane, polyester, nylon and various proprietary powder coating materials meeting most industry and aerospace specifications. In addition to our enhanced

Read More »

News at 1401 – Chem Mill, Boeing, Metal Finishing

Good things are happening at MIL Inc’s primary facility at 1401 Greenleaf… Boeing recently approved MIL Inc. for chemical milling of titanium sheet in accordance with PS20022. There are only a handful of Boeing approved suppliers worldwide capable of this unique process. Check out our comprehensive growing list of Boeing approvals at the following link: http://active.boeing.com/doingbiz/d14426/getprocesscodes.cfm?SupplierCode=BE10014316 Thank you for your patience in December and January as we made significant enhancements and performed preventive maintenance on our passivation, electropolish, and hard

Read More »

MIL Featured in Design2Part Magazine

Human Driven Special Processes Are a Vital Link in the Aerospace Supply Chain Magnetic Inspection Laboratory (MIL), a company that provides special process services like anodizing and cadmium plating to aerospace prime contractors, has been an approved supplier to Lockheed Martin for more than three decades. The company began in 1942 as a one-man operation that examined parts for the U.S. Government. Today, Magnetic Inspection Laboratory provides five broad categories of services, including chemical processing (CP), coatings (CTG), nondestructive testing (NDT), shot peening, and welding and brazing, at its 120,000-square-foot facility in Elk Grove Village, Illinois, about a 15-minute drive from Chicago O’Hare International Airport. Mike Noettl, a special process engineer at Magnetic Inspection Laboratory (MIL), said that the company’s special processes are a vital

Read More »

News at 1225 – Continuous Improvement

2013 is off to great start with the implementation of a number of continuous process improvements affecting quality, capacity, and cycle times at our coating division facility on 1225 Greenleaf Avenue in Elk Grove Village, Illinois. Installation of vent-less powder coating booth specifically designed for Bell Helicopter bluecoat and prime aerospace applications. MIL Inc. applies a broad spectrum of epoxy, polyurethane, polyester, nylon and various proprietary powder coating materials meeting most industry and aerospace specifications. In addition to our enhanced powder coating capabilities, a February installation is planned for our new 3,900 cubic foot F.O.D. controlled down draft spray booth and 80,000 CFM air management system setting new standards for high purity coating applications. Concurrently, masking capacity and capabilities have been generously increased with the

Read More »

News at 1401 – Chem Mill, Boeing, Metal Finishing

Good things are happening at MIL Inc’s primary facility at 1401 Greenleaf… Boeing recently approved MIL Inc. for chemical milling of titanium sheet in accordance with PS20022. There are only a handful of Boeing approved suppliers worldwide capable of this unique process. Check out our comprehensive growing list of Boeing approvals at the following link: http://active.boeing.com/doingbiz/d14426/getprocesscodes.cfm?SupplierCode=BE10014316 Thank you for your patience in December and January as we made significant enhancements and performed preventive maintenance on our passivation, electropolish, and hard anodize process lines. These improvements will yield higher quality, reduced lead times and double our hard anodize capacity.

Read More »

2023 Trade Show Dates

Design-2Part (D2P)
Location: Schaumburg
Dates: May 17th-18th
Recent Posts

Contact our support team for help with more specific questions about our offerings and processes.

Request a Quote
On Trend

Most Popular Stories

Explore more

MIL Featured in Design2Part Magazine

Human Driven Special Processes Are a Vital Link in the Aerospace Supply Chain Magnetic Inspection Laboratory (MIL), a company that provides special process services like

Stay in the know with all things MIL.
Sign up for our email list for updates.

1401 GREENLEAF AVE. ELK GROVE VILLAGE, IL 60007
Main Line: 847.437.4488 | Customer Success Direct Line: 847.621.5600

Copyright © 2023

Search our approvals

Search
Generic filters